Home › Products › Linear ball bushings

Linear ball bushings — NB SLIDE BUSH

The simplest route to precise linear motion along a round shaft.

How it works

A ball bushing guides a machine element along a round shaft. Inside, the balls recirculate in a closed loop: some carry the load at any given moment while the rest return through the return channel. Friction is rolling rather than sliding, so resistance to motion stays low and practically independent of speed, and the element does not slip on start-up.

SLIDE BUSH is the product NIPPON BEARING started with in 1960 — and it remains the foundation of the range today.

When a ball bushing is the right choice

  • motion runs along a shaft — a lower purchase cost at the outset
  • a simple design matters
  • ease of manufacture and quick replacement during an overhaul
  • availability of spare parts
  • the load ranges from low to moderate
  • micrometre precision is not required
  • there are no moments or forces to carry outside the shaft axis

When to reach for something else

If the system has to carry large moments or work with high rigidity, the right choice is BALL SPLINE. If the load is high but the design must stay on a shaft, the answer is the TOPBALL® series.

Product advantages

  • low, stable resistance to motion across the whole speed range
  • simple mounting — the bushing seats directly in the housing or comes mounted in a block
  • a complete system together with NB SHAFT guide shafts, matched to the same diameter and to the tolerance chosen by the customer
  • corrosion-resistant versions for environments with raised cleanliness requirements

Available versions

  • bushing seated directly in the housing
  • flanged bushing — square, round or double-cut flange — for face mounting
  • standard, extended or double length
  • in ready-made blocks — linear ball bushing mounted in a housing
  • closed and open types for shafts supported along their full length
  • corrosion-resistant or stainless steel versions
  • higher precision class — available from the catalogue
  • clearance or preload other than standard — on customer request

Dimensions, static and dynamic load ratings and tolerances are available in the catalogue.

Typical applications

  • Automation and robotics — feeder axes, manipulators, assembly stations; wherever cycle repeatability and the number of cycles per minute decide
  • Medical devices — diagnostic and laboratory equipment; quiet running, smooth motion over short travels, stainless steel versions
  • Metalworking — CNC machine axes and auxiliary equipment; high load rating, rigidity and resistance to contamination in the working environment
  • Optics — simple traverse axes where a crossed roller guide would be overkill

We will propose a bushing for your needs

Load, stroke, speed and operating conditions. That is enough to indicate the type and size of the component.

Enquiry form

Load, stroke, speed, operating conditions, installation conditions, deadline.